Model: CD-956E 56X speed
Operating System: Other (Note: might work with other versions of this os.)
This CDROM drive supports UDMA mode and the default setting is disabling UDMA. Jumper must be set to 3 pin from left should be their by default but mine was not, it caused problems reading disks until it was in place or udma mode was enabled.
For Windows98 users, you can enable UDMA mode by removing a jumper on the rear panel.
For Windows95 users, it is better to select standard mode (non UDMA) for system stability issue. However, if it is
necessary for you to set to UDMA mode, we recommend to install the UDMA driver which came with your
motherboard. If you have further problem, please contact your motherboard supplier for an update UDMA driver.